Camaro/Firebird Portfolio

2015 ZL1 ZL-Win Camshaft & Bolt Ons

This bright white ZL1 picked up an awesome 184 rwhp & 146 ft/lbs tq from our ZL-Win camshaft, Kooks 1 7/8″ Headers, Lingenfelter Performance Engineering heat exchanger & pulley setup, and a couple other small bolt ons!We also added our Brian Tooley Deluxe Cam Install kit, along with a COMP Trunion Upgrade and a Melling 10296 oil pump as well

Read More »

2010 LS3 Camaro Phoenix Cam Install

This bolt-on LS3 Camaro came by for a Phoenix Cam Install. We added our Brian Tooley Deluxe Cam Install kit, along with a COMP Trunion Upgrade and a Melling 10296 oil pump as well. With a RotoFab Cold Air Intake and Kooks 1 7/8″ Headers, it baselined at 413 rwhp. After the cam install, we found another 52rwhp, ending up at a

Read More »

2011 LS3 Camaro Kooks Headers and Phoenix Cam

This very clean 2011 LS3 dyno’d 391rwhp as a baseline, with only a Cold Air Inductions cold air intake. We added our popular Phoenix Cam and a set of Kooks 1 7/8″ headers, picking up an outstanding 90rwhp to finish at 480rwhp! We also installed our Brian Tooley Deluxe Cam Install kit and a Melling 10296 oil pump. Our catch can

Read More »

1997 Camaro Z28 24x LT1 Procharger Install

She’s back…the cleanest LT1 you’ve seen! This car came in last year for an EFI connection 24x swap (previous blog post HERE), along with heads, cam, and other goodies, laying down 420 rwhp & 373 ft/lbs torque. This year it returned for a Procharger install, ending up at 644 rwhp at a very reasonable 10lbs of boost. We also added

Read More »

2015 Camaro 1LE Custom Cam

This slick looking 2015 LS3 Camaro came in for a very mild cam and a set of Kooks Headers and Exhaust. We picked up 67rwhp & 38 ft/lbs tq out of this little package! This build utilized a custom cam by Alvin at PCM of NC, meant to be mild and quiet. We also installed our Brian Tooley Deluxe Cam

Read More »

2002 Camaro Firefighter Cam & AFR Heads

You rarely see them as clean as this anymore! This mint 2002 35th Anniversary Camaro was ready for some performance upgrades, with a set of AFR cylinder heads, our Firefighter Cam, and a 92mm FAST intake set up. We also installed our Brian Tooley Deluxe Cam Install Kit and a Melling 10296 for added support. This car dyno’d at 342rwhp and

Read More »

2012 LS3 Rotofab & Kooks Headers

A quick performance package on this 2012 LS3 yields 46 rwhp & 47 ft/lbs tq, along with better performance and sound! We used our tried and true Roto-Fab for the cold air intake, and of course Kooks Headers 1 7/8″ headers!           

Read More »

2013 1LE LS3 Camaro Phoenix Cam Install

We love the bright color of this 1LE LS3 Camaro that stopped in for a Phoenix Cam Install. We added our Brian Tooley Deluxe Cam Install kit, along with a COMP Trunion Upgrade and a Melling 10296 oil pump as well. With a Cold Air Inductions intake and Kooks 1 7/8″ Headers, it baselined at 418 rwhp. After the cam

Read More »

2015 Z28 Whipple LS7 Blower Cam

Super clean, super cool….super fast! The king of Camaros – this sweet LS7 came in for a cam install to go along with the Whipple 2.9L blower! On only 8lbs of boost, it laid down 750rwhp & 641 ft/lbs! We used one of our LS7 Blower Cams, paired with our Brian Tooley Deluxe Cam Install Kit, Melling 10296 Oil Pump, and

Read More »
kenne bell camaro l99

2010 Camaro L99 ERL 427ci & Kenne Bell Blower

After many years and lots of horsepower with a Kenne Bell on a stock L99, the bottom end finally said uncle on this 2010 Camaro. We replaced it with a 427ci shortblock from ERL Performance, topped off with new heads from Advanced Induction. This time around, we also beefed up the fuel system with a Fore Innovations Stage 4 kit.

Read More »

Thank you for visiting us!

Use code T2FJ5U

5% off site-wide | new customers only

*coupon code is for 5% off most parts and tuning