Description
PCM of NC TBSS Attitude Camshaft
Cam Specs: 222/230, .58x/.59x, @ .050″, 111 LSA
Intended Engine: LS1, LS2, LS6, 5.3L & 6.0L Trucks
Other Modifications Needed: Cold air intake, headers
Minimum Torque Converter: 2800rpm+
Recommended Torque Converter: 3200rpm+
Expected Gains: 40-50rwhp
Operating Range: 3,000-6,500RPM
Best seller! Our TBSS Attitude camshaft holds the LS2 Trailblazer SS Cam Only Record. This was designed with heavy vehicles in mind. It is done by utilizing unique set of valve events to get the most torque possible while making still great power up on the top end. It is perfectly suited to truck style intake manifolds as found on the Trailblazer SS and SSR. This cam will lope and sound rough at an idle but with good tuning drivability is fantastic.
We recommend at least a 3000 stall and a set of headers to run this camshaft. It is close to .600 valve lift – we recommend springs good to at least .600 lift and hardened pushrods. Tuning required. By adding just the TBSS Attitude camshaft we picked up 50rwhp and 40 Ft-lbs of torque on this truck – Dyno Results Click Here. Need the supporting parts to install this cam? See our Camshaft Install Kits. Note: Piston to valve clearance and pushrod length should always be checked during a thorough install. Our cams are proudly ground by COMP cams!
PCM of NC Driveability Index (1 is stock, 10 is race only)
Reviews
There are no reviews yet.