A&A Vortech Supercharger Kit LS2/LS3/LS7

Description

Please call or email to order!

2010 Z06 A&A Kit Build Blog – HERE

2008 LS3 Corvette Build Blog – HERE

The A&A Supercharger kit brings you dramatic increases in power while not degrading everyday drivability or highway gas mileage! The system utilizes a large blow off valve that remains open at cruise and light throttle. This, essentially, allows the supercharger to “freewheel” under normal conditions, reducing parasitic loss to less than that of an alternator. Average increase to the rear wheels is approximately 175 RWHP! No other modification, in this price range, even comes close. Available in black or polished finish!

A&A SYSTEM ADVANTAGES OVER THE COMPETITION

Superior Belt Drive System

Belt wrap is the key to eliminating belt slip and our proprietary bracket system offers more belt wrap than any other system on the market. Our bracket is CNC machined from 5/8” high quality 6061 aluminum plate and fly cut on both sides to assure absolute consistency in thickness. This is imperative for proper belt alignment. Our brackets are constantly quality checked by assembling on our “mock up” engine and checking alignment with a laser aligner.

Superior Intercooler Design

Our intercooler design has evolved, through constant testing, into the most efficient intercooler system available for the C6 Corvette. Our intercoolers rely on superior “air management” of the charge air as well as the external cooling airflow. Both are equally important and are often overlooked by the competition. With the limited space available in a Corvette, positioning of the intercooler is critical. A large intercooler that is hidden behind the frame is not as efficient as a smaller intercooler that is exposed to full frontal airflow. Our intercooler is as large as any available but it’s placement is the key to superior charge cooling. The entire core is exposed to the cooling air stream.
The top of the intercooler core is positioned right at the bottom of the frame. It is mounted forward so as not to allow air to flow over the top of the intercooler. We have side panels and a larger bottom panel that seals up against the front fascia. This gives us a “Ram Air” effect through our intercooler. No other manufacturer has spent as much time and resources on air flow management as A&A.

Looking through the grill opening on an A&A system will reveal the difference between our system and all others. Nothing but the core area of the intercooler is exposed to the incoming rush of cold air. The intercooler face in encompassed by our sheet metal enclosure and both tanks are completely hidden from view. The area next to the intercooler is also closed in with aluminum panels assuring that any air that is fed around the sides of the intercooler is redirected back into the radiator. Again, this is something no other manufacturer has incorporated into their systems. Other designs allow the upper portion of the intercooler core to be shrouded by the frame and allow air to travel over and around the intercooler. When looking through the grill opening on other systems, you see the lower tank and only a portion of the core. This is horribly inefficient! The interior of our intercoolers differ from the competition also. We utilize directional vanes in the lower tank to direct charge air evenly across the intercooler core. This is an expensive but very important addition. Testing has shown that the incoming air charge will pack into the side opposite the inlet, rendering the near side almost useless.

Superior Engine Cooling

Intercooler positioning is equally important in how it affects engine cooling. Many supercharger systems are plagued by overheating issues due to intercooler placement. Our intercooler is placed much further forward than any other design. This allows the fans to draw cooling air through the radiator and AC condenser without being shrouded by the intercooler.

Aesthetics

The A&A system is one of the best looking systems around, fit and finish is second to none. Our brackets, ductwork and the supercharger, itself, are all coated in a black finish. Our top shroud fits perfectly and is powder coated satin black. All the visible couplers are high quality silicone and our “T Band” clamps are polished stainless steel. The entire system fits snuggly under your stock hood. You’ll be proud to show off your engine compartment with your A&A Supercharger system installed.

Top Quality Components

•     We utilize only the highest quality components in our systems.
•     Vortech head units are used exclusively. (read why we chose Vortech)
•     Highly efficient, hand welded, air to air intercoolers.
•     Large Turbosmart blowoff valve
•     Aluminum charge tubing for lighter weight
•     Silicone couplers
•     Stainless steel clamps
•     High capacity injectors
•     High capacity LPE fuel pump or Boost A Pump

Notes

2006+ Z06 and 2008+ LS3 Z51 6-Speed Manual transmission cars, and 2010+ Grand Sport dry sump cars require a radiator upgrade. The new radiator will have provisions for the external oil cooler. Custom PCM calibration based on specific vehicle and engine modifications will be required for use with this kit.

Available for installation and tuning at our Mooresville, NC location!