Description
PCM of NC LS3 Avenger Camshaft
Cam Specs: 223/239, .61x/.62x, @ .050″, 114 LSA
Intended Engine: LS3, L76, L99
Other Modifications Needed: Cold Air Intake, Headers/Exhaust, DOD/AFM Delete (if applicable)
Minimum Torque Converter: 2800 rpm
Recommended Torque Converter: 3000 rpm+
Expected Gains: 30-50 rwhp
Operating Range: 3,000-6,500RPM
This lopey LS3/L99/L76/L92 Avenger cam features a nasty lope with very good driveablity. Works very well with ported heads, but also with stock heads as well. Produces a little more torque than the ‘545’ cam but will not make as much power in supercharged applications. Without heads, expect around 470-480rwhp. With ported and polished heads, expect near 500 rwhp and 470 torque. Cam card with full specs ships with purchase. Check out THIS customer build blog which features the Avenger cam. IDLE VIDEO.
Requires intake/headers/exhaust and tuning, automatic cars should have at least a 2800 RPM stall. Need the supporting parts to install this cam? See our Camshaft Install Kits. Note: Piston to valve clearance and pushrod length should always be checked during a thorough install. Our cams are proudly ground by COMP!
PCM of NC Driveability Index (1 is stock, 10 is race only)
Reviews
There are no reviews yet.